TeraCalc3 - Equipment Area Calculation Master Manual

1. Overview

This document serves as the comprehensive manual and technical specification for the "Equipment Area Calculation" module within the TeraCalc3 application. This feature is designed to calculate the physical installation footprint and total surface area of logistics equipment based on specified 3D dimensions.

2. Specifications

2.1. Feature Overview

Based on the physical shape and dimensions entered by the user, the system calculates and displays the following metric areas:

• Base Area (Installation Footprint)
• Surface Area (utilized for calculating painting costs, heat dispersion, etc.)
• Other specified cross-sectional areas

2.2. Input Data

The following parameters are required to execute calculations.

2.3. Calculation Formulas

The primary mathematical formulas applied are as follows:

• Cuboid Base Area: Width (W) * Depth (D)
• Cuboid Surface Area: 2 * (W*D + W*H + D*H)
• Cylinder Base Area: π * (Diameter/2)^2
• Cylinder Surface Area: 2 * (Base Area) + (Circumference) * Height (H)

2.4. Output Data

The system outputs the following calculated results:

3. Operating Guide

3.1. Screen Layout

(Screen captures and UI element descriptions will be documented here)

• Input Panel: Designated area to select shape and input millimeter dimensions.
• Calculate Button: Triggers the area calculation engine.
• Result Display Area: Renders the calculated area outputs.

3.2. Operation Steps

1. Select Shape: Choose the target equipment geometry (e.g., Cuboid) from the dropdown list.
2. Input Dimensions: Enter the width, depth, and height corresponding to the physical equipment in millimeters.
3. Execute: Click the "Calculate" execution button.
4. Verify Results: Review the calculated Base Area and Surface Area displayed in square meters.

4. Revision History